Cane Crono Guide de l'utilisateur télécharger pdf (Page 59)

MAN 01/EN/03 CRONO PAR 50 06/13

Auto

PUMP SETTINGS SEQUENCE

SECTION 14

To change the settings the pump must:

• be set to OFF or StoP;

• have the settings lock off (i.e. set to L0).

You can change the setting while the display is ashing by pressing buttons

and .

Visualising/setting the time

To access the settings pres the

button for about 4

seconds: the display shows the time.

Pushing the - button for about 5 seconds enables the setting

of the time (see page 61).

Setting the minutes

Press the button again, and the display shows and allows

setting the minutes (see page 61).

Setting the bolus dose volume

Press the button, and the display shows and allows

setting of the bolus dose volume (see page 62).

Setting the interval between bolus doses

Press the button again, and the display shows and

allows setting the interval between the bolus doses (see

page 63).

Setting the rst ow rate (F1)

Press the button again, and the display shows and allows

setting the rst ow rate (see page 64).

Setting the second ow rate (F2)

Press the button again, and the display shows and allows

setting the second ow rate (see page 65).

Setting the third ow rate (F3)

Press the

button again, and the display shows and allows

setting the third ow rate (see page 65).

PROG

ml/h

PROG

ml/h

PROG

ml/h

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 113 114

Pas de commentaire

Cane Crono Guide de l'utilisateur Page 59